Skip to content

Local

Type
Class
Namespace
craft\fs
Inherits
craft\fs\Local » craft\base\Fs » craft\base\SavableComponent » craft\base\ConfigurableComponent » craft\base\Component » craft\base\Model » yii\base\Model » yii\base\Component » yii\base\BaseObject
Implements
ArrayAccess, IteratorAggregate, craft\base\ComponentInterface, craft\base\ConfigurableComponentInterface, craft\base\FsInterface, craft\base\LocalFsInterface, craft\base\ModelInterface, craft\base\SavableComponentInterface, yii\base\Arrayable, yii\base\Configurable, yii\base\StaticInstanceInterface
Uses traits
craft\base\ClonefixTrait, craft\base\FsTrait, craft\base\SavableComponentTrait, yii\base\ArrayableTrait, yii\base\StaticInstanceTrait
Extended by
craft\fs\Temp
Since
4.0.0

Local represents a local filesystem.

View source

Public Properties

PropertyDescription
activeValidatorsyii\validators\Validator – The validators applicable to the current scenario.
attributesarray – Attribute values (name => value).
behaviorsyii\base\Behavior – List of behaviors attached to this component.
dateCreatedDateTime, null – The date that the component was created
dateUpdatedDateTime, null – The date that the component was last updated
errorsarray – Errors for all attributes or the specified attribute.
fileList
firstErrorsarray – The first errors.
handlestring, null – Handle
hasUrlsboolean – Whether the volume has a public URL
idinteger, string, null – The component’s ID (could be a temporary one: "new:X")
isNewboolean – Whether the component is new (unsaved)
iteratorArrayIterator – An iterator for traversing the items in the list.
namestring, null – Name
oldHandlestring, null – Old handle
pathstring, null – Path to the root of this sources local folder.
rootPathstring
rootUrlnull, string
scenariostring – The scenario that this model is in.
settingsarray – The component’s settings
settingsHtmlmixed
uidstring, null – UID
urlstring, null – The volume’s URL
validatorsArrayObject, yii\validators\Validator – All the validators declared in the model.

fileList

Default value
null
Access
Read-only

View source

path

Type
string, null
Default value
null

Path to the root of this sources local folder.

View source

rootPath

Type
string
Default value
null

View source

settingsHtml

Type
mixed
Default value
null

View source

Protected Properties

PropertyDescription
showHasUrlSettingboolean – Whether the “Files in this filesystem have public URLs” setting should be shown.
showUrlSettingboolean – Whether the “Base URL” setting should be shown.
visibilityMapint[][] – Visibility map

visibilityMap

Type
int[][]
Default value
[ self::VISIBILITY_FILE => [ self::VISIBILITY_DEFAULT => 0644, self::VISIBILITY_PUBLIC => 0644, self::VISIBILITY_HIDDEN => 0600, ], self::VISIBILITY_DIR => [ self::VISIBILITY_DEFAULT => 0775, self::VISIBILITY_PUBLIC => 0775, self::VISIBILITY_HIDDEN => 0700, ], ]

Visibility map

View source

Public Methods

MethodDescription
__call()Calls the named method which is not a class method.
__clone()This method is called after the object is created by cloning an existing one.
__construct()
__get()Returns the value of a component property.
__isset()Checks if a property is set, i.e. defined and not null.
__set()Sets the value of a component property.
__unset()Sets a component property to be null.
activeAttributes()Returns the attribute names that are subject to validation in the current scenario.
addError()Adds a new error to the specified attribute.
addErrors()Adds a list of errors.
addModelErrors()Adds errors from another model, with a given attribute name prefix.
afterDelete()Performs actions after a component is deleted.
afterSave()Performs actions after a component is saved.
afterValidate()This method is invoked after validation ends.
attachBehavior()Attaches a behavior to this component.
attachBehaviors()Attaches a list of behaviors to the component.
attributeHints()Returns the attribute hints.
attributeLabels()Returns the attribute labels.
attributes()Returns the list of attribute names.
beforeApplyDelete()Performs actions before a component delete is applied to the database.
beforeDelete()Performs actions before a component is deleted.
beforeSave()Performs actions before a component is saved.
beforeValidate()This method is invoked before validation starts.
behaviors()Returns a list of behaviors that this component should behave as.
canGetProperty()Returns a value indicating whether a property can be read.
canSetProperty()Returns a value indicating whether a property can be set.
className()Returns the fully qualified name of this class.
clearErrors()Removes errors for all attributes or a single attribute.
copyFile()
createDirectory()
createValidators()Creates validator objects based on the validation rules specified in rules().
datetimeAttributes()Returns the names of any attributes that should hold DateTime values.
deleteDirectory()
deleteFile()
detachBehavior()Detaches a behavior from the component.
detachBehaviors()Detaches all behaviors from the component.
directoryExists()
displayName()Returns the display name of this class.
ensureBehaviors()Makes sure that the behaviors declared in behaviors() are attached to this component.
extraFields()Returns the list of fields that can be expanded further and returned by toArray().
fields()Returns the list of fields that should be returned by default by toArray() when no specific fields are specified.
fileExists()
formName()Returns the form name that this model class should use.
generateAttributeLabel()Generates a user friendly attribute label based on the give attribute name.
getActiveValidators()Returns the validators applicable to the current scenario.
getAttributeHint()Returns the text hint for the specified attribute.
getAttributeLabel()Returns the text label for the specified attribute.
getAttributes()Returns attribute values.
getBehavior()Returns the named behavior object.
getBehaviors()Returns all behaviors attached to this component.
getDateModified()
getErrorSummary()Returns the errors for all attributes as a one-dimensional array.
getErrors()Returns the errors for all attributes or a single attribute.
getFileList()
getFileSize()
getFileStream()
getFirstError()Returns the first error of the specified attribute.
getFirstErrors()Returns the first error of every attribute in the model.
getIsNew()Returns whether the component is new (unsaved).
getIterator()Returns an iterator for traversing the attributes in the model.
getRootPath()Return the root path of the FS.
getRootUrl()
getScenario()Returns the scenario that this model is used in.
getSettings()Returns an array of the component’s settings.
getSettingsHtml()Returns the component’s settings HTML.
getShowHasUrlSetting()Returns whether the “Files in this filesystem have public URLs” setting should be shown.
getShowUrlSetting()Returns whether the “Base URL” setting should be shown.
getValidators()Returns all the validators declared in rules().
hasErrors()Returns a value indicating whether there is any validation error.
hasEventHandlers()Returns a value indicating whether there is any handler attached to the named event.
hasMethod()Returns a value indicating whether a method is defined.
hasProperty()Returns a value indicating whether a property is defined for this component.
init()Initializes the object.
instance()Returns static class instance, which can be used to obtain meta information.
isAttributeActive()Returns a value indicating whether the attribute is active in the current scenario.
isAttributeRequired()Returns a value indicating whether the attribute is required.
isAttributeSafe()Returns a value indicating whether the attribute is safe for massive assignments.
isSelectable()Returns whether the component should be selectable in component Type selects.
load()Populates the model with input data.
loadMultiple()Populates a set of models with the data from end user.
off()Detaches an existing event handler from this component.
offsetExists()Returns whether there is an element at the specified offset.
offsetGet()Returns the element at the specified offset.
offsetSet()Sets the element at the specified offset.
offsetUnset()Sets the element value at the specified offset to null.
on()Attaches an event handler to an event.
onUnsafeAttribute()This method is invoked when an unsafe attribute is being massively assigned.
read()
renameDirectory()
renameFile()
rules()Returns the validation rules for attributes.
safeAttributes()Returns the attribute names that are safe to be massively assigned in the current scenario.
scenarios()Returns a list of scenarios and the corresponding active attributes.
setAttributes()Sets the attribute values in a massive way.
setScenario()Sets the scenario for the model.
settingsAttributes()Returns the list of settings attribute names.
toArray()Converts the model into an array.
trigger()Triggers an event.
validate()Performs the data validation.
validateMultiple()Validates multiple models.
validatePath()
write()
writeFileFromStream()

__construct()

View source

Arguments

  • $config

afterSave()

Performs actions after a component is saved.

View source

Arguments

  • $isNew (boolean) – Whether the component is brand new

attributeLabels()

Returns the attribute labels.

Attribute labels are mainly used for display purpose. For example, given an attribute firstName, we can declare a label First Name which is more user-friendly and can be displayed to end users.

By default an attribute label is generated using generateAttributeLabel(). This method allows you to explicitly specify attribute labels.

Note, in order to inherit labels defined in the parent class, a child class needs to merge the parent labels with child labels using functions such as array_merge().

View source

Returns

array – Attribute labels (name => label)

copyFile()

View source

Arguments

  • $path
  • $newPath
  • $config

createDirectory()

View source

Arguments

  • $path
  • $config

deleteDirectory()

View source

Arguments

  • $path

deleteFile()

View source

Arguments

  • $path

directoryExists()

View source

Arguments

  • $path

displayName()

Returns the display name of this class.

View source

Returns

string – The display name of this class.

fileExists()

View source

Arguments

  • $path

getDateModified()

View source

Arguments

  • $uri

getFileList()

View source

Arguments

  • $directory
  • $recursive

getFileSize()

View source

Arguments

  • $uri

getFileStream()

View source

Arguments

  • $uriPath

getRootPath()

Return the root path of the FS.

View source

Returns

string

getSettingsHtml()

Returns the component’s settings HTML.

An extremely simple implementation would be to directly return some HTML:

php
return '<textarea name="foo">'.$this->foo.'</textarea>';

For more complex settings, you might prefer to create a template, and render it via craft\web\View::renderTemplate(). For example, the following code would render a template located at src/templates/_settings.html, passing the settings to it:

php
return Craft::$app->view->renderTemplate('plugin-handle/_widget-settings', [
    'widget' => $this
]);

If you need to tie any JavaScript code to your settings, it’s important to know that any name and id attributes within the returned HTML will probably get namespaced, however your JavaScript code will be left untouched. For example, if getSettingsHtml() returns the following HTML:

html
<textarea id="foo" name="foo"></textarea>
<script type="text/javascript">
  var textarea = document.getElementById('foo');
</script>

…then it might actually look like this before getting output to the browser:

html
<textarea id="namespace-foo" name="namespace[foo]"></textarea>
<script type="text/javascript">
  var textarea = document.getElementById('foo');
</script>

As you can see, that JavaScript code will not be able to find the textarea, because the textarea’s id attribute was changed from foo to namespace-foo. Before you start adding namespace- to the beginning of your element ID selectors, keep in mind that the actual namespace is going to change depending on the context. Often they are randomly generated. So it’s not quite that simple.

Thankfully, Craft provides a couple handy methods that can help you deal with this:

So here’s what a getSettingsHtml() method that includes field-targeting JavaScript code might look like:

php
public function getSettingsHtml(): ?string
{
    // Figure out what the ID is going to be namespaced into
    $id = 'foo';
    $namespacedId = Craft::$app->view->namespaceInputId($id);
    // Render and return the input template
    return Craft::$app->view->renderTemplate('plugin-handle/_widget-settings', [
        'id' => $id,
        'namespacedId' => $namespacedId,
        'widget' => $this,
    ]);
}

And the _widget-settings.twig template might look like this:

twig
<textarea id="{{ id }}" name="foo">{{ widget.foo }}</textarea>
<script type="text/javascript">
  var textarea = document.getElementById('{{ namespacedId }}');
</script>

The same principles also apply if you’re including your JavaScript code with craft\web\View::registerJs().

View source

Returns

string, null

init()

Initializes the object.

This method is invoked at the end of the constructor after the object is initialized with the given configuration.

View source

read()

View source

Arguments

  • $path

renameDirectory()

View source

Arguments

  • $path
  • $newName

renameFile()

View source

Arguments

  • $path
  • $newPath
  • $config

validatePath()

Since
4.4.6

View source

Arguments

Returns

void

write()

View source

Arguments

  • $path
  • $contents
  • $config

writeFileFromStream()

View source

Arguments

  • $path
  • $stream
  • $config

Protected Methods

MethodDescription
defineBehaviors()Returns the behaviors to attach to this class.
defineRules()Returns the validation rules for attributes.
extractFieldsFor()Extract nested fields from a fields collection for a given root field Nested fields are separated with dots (.). e.g: "item.id" The previous example would extract "id".
extractRootFields()Extracts the root field names from nested fields.
getRecursiveIterator()Create the recursive iterator for traversing file system.
prefixPath()Prefix the path with the root path.
resolveFields()Determines which fields can be returned by toArray().
resolveVisibility()Resolve visibility by a config array and type.

defineRules()

Since
3.4.0

Returns the validation rules for attributes.

See rules() for details about what should be returned.

Models should override this method instead of rules() so EVENT_DEFINE_RULES handlers can modify the class-defined rules.

View source

Returns

array

getRecursiveIterator()

Create the recursive iterator for traversing file system.

View source

Arguments

Returns

RecursiveIteratorIterator

prefixPath()

Prefix the path with the root path.

View source

Arguments

Returns

string

Throws

resolveVisibility()

Resolve visibility by a config array and type.

View source

Arguments

Returns

integer

Constants

ConstantDescription
CONFIG_MIMETYPE
CONFIG_VISIBILITY
SCENARIO_DEFAULTThe name of the default scenario.
VISIBILITY_DEFAULT
VISIBILITY_DIR
VISIBILITY_FILE
VISIBILITY_HIDDEN
VISIBILITY_PUBLIC